Water extraction is the mechanical part of the job: truck-mounted or portable units pull water out of carpet, pad and hard floors so drying equipment can work. In the Houston area, extraction usually happens on the first visit, right after the source is shut off.
After extraction, soaked pad usually comes out and the carpet is floated or lifted so air can reach the slab. Whatever stays in the house needs to be dry within 24 to 48 hours, per EPA guidance[EPA].

Typical steps
- Source off. Water shut off at the main or fixture.
- Extract. Carpet, pad and hard floors extracted until little water comes up.
- Pull pad if needed. Soaked pad is removed so the slab can dry.
- Dry and measure. Equipment runs until readings show dry.
Do
- Keep foot traffic off wet carpet.
- Move rugs and loose items off wet floors.
Avoid
- Leaving wet rugs folded on the floor.
- Running the heat to “dry things out” with doors closed.